Views: 0 Author: Site Editor Publish Time: 2026-03-17 Origin: Site
How to easily install a sink soap dispenser
We are a genuine source factory with our own production base of 30,000 square meters in Jiangmen, Guangdong. Equipped with 30+ automated production lines, including precision stamping, laser welding, fully automatic PVD coating, injection molding, and clean assembly workshops. Monthly capacity reaches 500,000 pieces, capable of stably handling large-volume orders.

How to easily install a sink soap dispenser on your own within three steps, please follow these steps:
Step 1: Locate the existing hole on the sink, which has a diameter ranging from approximately 27 to 32 mm.

Step 2: Remove the locking nut, leave the washer on the threaded flange, insert the flat end of the pump tube into the pump, and ensure that the washer is located directly below the flange. Thread the threaded flange through the hole of the sink or washbasin, tighten the locking nut by hand from under the sink to secure the flange, and then screw the bottle on.

Step 3: Remove the top cover of the soap dispenser and add your favorite liquid. Press 8-10 times until the liquid flows out.

For best results, use regular liquid soap and avoid highly viscous or low-quality formulas. Clean the dispenser's surface with a soft cloth. If the exterior becomes dirty, simply rinse it with warm water—no tools are needed. It’s a quick and easy way to keep your kitchen looking brand new!